OR/4 with CORNER APPLICATOR

Automatic strapping machine

OR/4 with CORNER APPLICATOR

OR/4 is a Strapping Machine Designed to be Integrated in Fully Automatic Packaging Lines.

It can make the horizontal strapping of palletized loads by making one or more strapping cycles at different heights according to the program set-up. The system has been designed for both manual and automatic functions. All main functions are displayed by light signals.

OR/4 – CA (Corner Applicator Device): if the load is either fragile or unstable, this machine can be equipped with a special system to fit corrugated edgeboards in the corners. This device is useful to prevent product damage during the strapping cycles. The edgeboards are available in different dimensions according to customer needs.

ADVANTAGES

Multiple strapping patterns

Ready to be integrated in automatic lines

Enables manual and automatic operation

Sturdy construction

Key Features

  • It is possible to choose different strapping heads according to the strap dimension required, as follows:
 
MODEL GT41 N
STRAP TYPE PP - PET
STRAP DIMENSIONS from 10 x 0,5 to 16 x 1,0
STRAP FEED SPEED up to 7 m/sec.
STRAP TAKE-UP SPEED up to 7 m/sec.
TENSIONING SPEED 0,04 - 0,14 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200
 
MODEL GS41 N
STRAP TYPE PP - PET
STRAP DIMENSIONS from 10 x 0,5 to 16 x 1,0
STRAP FEED SPEED up to 4 m/sec.
STRAP TAKE-UP SPEED up to 4 m/sec.
TENSIONING SPEED 0,11 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200
 
MODEL MG
STRAP TYPE PP - PET
STRAP DIMENSIONS from 9 x 0,6 to 19 x 1,0
STRAP FEED SPEED up to 2 m/sec.
STRAP TAKE-UP SPEED up to 2 m/sec.
FRICTION TIME up to 2,2 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200

Options
  • Compacting system for 2 or 4 sides

ADVANTAGES

Multiple strapping patterns

Ready to be integrated in automatic lines

Enables manual and automatic operation

Sturdy construction

Request info

+39 02 964951

Technical Request
Commercial Request

Please, accept to proceed