PS/84-2 TL

Automatic strapping machine

PS/84-2 TL

PS/84-2 TL is a Strapping Press Developed to Create Fully Automatic Strapping and Packaging Lines.
PS/84 is especially designed to strap either flat corrugated sheet cardboard,  boxes or even palletized special loads that, before being strapped, are compressed through a special motorized pressing platen moved along the frame of the machine through triple chains. The pressure is controlled by a loading cell (up to 5 tons) that, according to a special movement, allows the pressing platen to act and compensate pressure on the load against strength that the same opposes. This system can be set according to the type of load to be compressed and strapped. In order to apply two parallel straps at the center line of each pallet, this model is equipped with two strapping heads that allow the complete strapping cycle to be carried out in the shortest cycle time. The double head model can also be provided with specials spears to fix the load to the wooden pallet.

ADVANTAGES

User friendly touchscreen

Uniform load compression

Sturdy construction

Low maintenance effort

Key Features

  • It is possible to choose different strapping heads according to the strap dimension required, as follows:
 
MODEL GT41 N
STRAP TYPE PP - PET
STRAP DIMENSIONS from 10 x 0,5 to 16 x 1,0
STRAP FEED SPEED up to 7 m/sec.
STRAP TAKE-UP SPEED up to 7 m/sec.
TENSIONING SPEED 0,04 - 0,14 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200
 
MODEL GS41 N
STRAP TYPE PP - PET
STRAP DIMENSIONS from 10 x 0,5 to 16 x 1,0
STRAP FEED SPEED up to 4 m/sec.
STRAP TAKE-UP SPEED up to 4 m/sec.
TENSIONING SPEED about 0,11 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200
 
MODEL GS41 HT
STRAP TYPE PP - PET
STRAP DIMENSIONS from 10 x 0,5 to 19 x 1,27
STRAP FEED SPEED up to 3 m/sec.
STRAP TAKE-UP SPEED up to 3 m/sec.
TENSIONING SPEED about 0,08 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200
 
MODEL MG
STRAP TYPE PP - PET
STRAP DIMENSIONS from 9 x 0,6 to 19 x 1,0
STRAP FEED SPEED up to 2 m/sec.
STRAP TAKE-UP SPEED up to 2 m/sec.
FRICTION TIME from 0,5 to 1,8 sec.
POWER 1.0 kW
PLC SIEMENS® S7 1200

Options
  • Rotating cross device to lift and rotate 90° the package
  • Pneumatic upper and lower cardboard applier
  • Automatic coil change system
  • Retractable sword
  • Autodimensioning arch
  • Corner applicator device

ADVANTAGES

User friendly touchscreen

Uniform load compression

Sturdy construction

Low maintenance effort

Request info

+39 02 964951

Technical Request
Commercial Request

Please, accept to proceed